● OUR SERVICE

Turnkey
Cement Plant Solutions

Movers India delivers complete, single-point-responsibility cement plants from design and equipment manufacture to installation and commissioning.

● OUR APPROACH

What is a Turnkey Cement Plant?

Dharani

A turnkey plant is one where a single contractor handles the entire project, engineering, equipment supply, electrical and automation, civil work, erection, and commissioning so the client simply turns the key to start production. The practical value of this arrangement is accountability.

On a multi-vendor project, the design consultant, the equipment suppliers and the erection contractor each hold one piece of the scope, and every gap between those pieces becomes the client’s problem to manage. Under a turnkey cement plant contract, those interfaces are ours to resolve, and the client deals with one organisation from the first drawing to the final performance run.

Clients who want guidance before committing often engage us as a cement plant consultant first, and we are equally comfortable working in that advisory role ahead of a full contract.

● OUR TURNKEY PROJECT PROCESS

End-to-End Project Execution

From feasibility and design through manufacturing, erection, and commissioning, we manage every stage under one roof for a seamless project delivery.

01

Feasibility & Design

02

Equipment Manufacture

03

Civil Works

04

Erection

05

Commissioning & Trials

In practice that means engineering and equipment manufacture run in parallel with civil work at site against one coordinated schedule, so foundations are ready when equipment arrives, and the project closes with commissioning and performance trials rather than a handover of loose ends.

● PLANT RANGE

Cement Plant Capacities We Offer (100–1,500 TPD)

We design and build integrated dry-process cement plants ranging from 100 Tons Per Day up to 1,500 Tons Per Day to suit varying production needs. Within that band, the right capacity for a project is driven by limestone reserve, market catchment and available capital rather than by ambition alone, and we size the raw grinding, pyroprocessing and cement grinding sections as one balanced system so that no single stage becomes the bottleneck for the whole plant.

At the lower end of this range sits what the market commonly calls a mini cement plant, which remains a practical entry point for a first-time producer.

Paraguay

Integrated Dry-Process Plants

VSK

Mini Cement Plants

Silo Formation2

Clinker Storage & Silos

● KILN TECHNOLOGIES

VSK & Rotary Kiln Plants

We offer VSK (Vertical Shaft Kiln) technology for 100–600 TPD plants and Rotary Kiln technology for 600–1,500 TPD plants. The split is deliberate rather than arbitrary: below about 600 TPD, the lower capital cost and simpler operation of a vertical shaft kiln generally outweigh the automation and clinker-consistency advantages a rotary kiln brings, while above that threshold the economics reverse and rotary kiln technology becomes the sensible route.

VSK
100–600 TPD

VSK (Vertical Shaft Kiln) Plants

Lower capital cost and simpler operation — a practical, economical choice for smaller-capacity plants.

Rotary Kiln
600–1,500 TPD

Rotary Kiln Plants

Higher automation and consistent clinker quality at larger volumes, where the economics favour rotary kiln technology.

Ball Mill for Clinker
300–3,000 TPD

Clinker Grinding Units

We set up standalone cement grinding units with capacities from 300 to 3,000 TPD. A grinding unit takes bought-in or transferred clinker and converts it into finished cement, which removes the entire pyroprocessing investment from the project and suits producers operating in markets where limestone isn’t locally available. This is a substantially faster and less capital-intensive route into cement production than a full integrated plant.

● IN-HOUSE MANUFACTURING

Equipment We Manufacture In-House

Our in-house manufacturing covers ball mills, classifiers, kiln shells, and bucket elevators, ensuring quality control and faster delivery.

Manufacturing the core process equipment ourselves means design intent carries straight through from the engineering table to the fabrication floor without being reinterpreted by a third party, and it keeps delivery schedules under our own control rather than dependent on an external supplier’s order book.

Mill assembly

Ball Mills

Air Classifier

Classifiers

Kiln Shell

Kiln Shells

Bucket Elevator

Bucket Elevators

● OUR STRENGTH

Why Choose Movers India

FAQs

100 Tons Per Day to 1,500 Tons Per Day for integrated cement plants, and 300 Tons Per Day to 3,000 Tons Per Day for cement grinding units.

No. Limestone sourcing is handled by the client; our scope begins at plant engineering and equipment.

VSK (Vertical Shaft Kiln) is a smaller-scale, lower-capital technology suited to 100–600 TPD plants: the kiln is a vertical shaft where raw meal nodules move downward through the burning zone by gravity, giving lower capital and operating costs but less automation and slightly lower clinker uniformity. Rotary Kiln technology, used in our 600–1,500 TPD plants, uses a long, slightly inclined rotating cylindrical kiln that produces higher, more consistent clinker quality at larger volumes, with higher automation but greater capital investment.

Since 1979, we’ve combined in-house manufacturing with proven EPC execution across India and eight other countries, backed by direct promoter-level client relationships.

That last point matters more than it might appear on paper: clients deal directly with the people accountable for the project rather than working through layers of account management, which shortens the path from a site problem to a decision about how to fix it.

1979
In business since
9
Countries incl. India
EPC
Single-point delivery

Ask Our Team

Have a question? Send us a message and we’ll get back to you.

Get a Free Project Consultation

Talk to our team about your cement plant or grinding unit — from feasibility to commissioning.

error: