● OUR PRODUCT

Drag Chain Conveyors

Movers India is a reliable Drag Chain Conveyor Manufacturer, designing and manufacturing drag chain conveyors for enclosed, dust-free handling of bulk and abrasive materials.

● OVERVIEW

What is a Drag Chain Conveyor?

Drag Chain Conveyor

A drag chain conveyor is an enclosed conveying system that uses a chain fitted with flights to drag bulk material along a trough from inlet to discharge.

● WORKING PRINCIPLE

How It Works

A motor drives an endless chain fitted with flights inside a fully enclosed trough; the flights push material along the trough floor to the discharge point, keeping it sealed from dust and spillage throughout.

● COMPARISON

Drag Chain Conveyor vs. Belt Conveyor vs. Screw Conveyor

FeatureDrag ChainBelt ConveyorScrew Conveyor
EnclosureFully enclosedTypically openFully enclosed
Best forHot, abrasive, powdery materialsHigh-volume, long-distance transportPowders, granules over shorter runs
Dust/SpillageMinimalHigher (unless covered)Minimal
OrientationHorizontal & inclinedHorizontal & inclinedHorizontal & inclined
● MATERIALS & INDUSTRIES

Materials & Industries Handled

Our drag chain conveyors handle cement, fly ash, coal, clinker, powders, granules, sludge, and other abrasive or hot materials.

● SPECIFICATIONS

Technical Specifications

ParameterRange
CapacityUp to 500+ TPH
Trough LengthSite-specific, extendable in sections
Incline Angle0°–30°
Chain Speed0.2–0.6 m/s
● OPTIONS

Types of Drag Chain Conveyors We Offer

We offer single chain conveyors for lighter duty and twin chain conveyors for higher capacity and heavier loads, including en-masse (Redler-type) designs for dense, continuous material flow.

● KEY FEATURES

Key Features & Benefits

Our drag chain conveyors offer a fully enclosed, dust-free design with minimal spillage; better handling of hot, abrasive, or fine powdery materials than open belt systems; low-maintenance, wear-resistant flights and chain; and suitability for demanding continuous duty.

● ENGINEERING

Build Quality & Engineering

Our conveyors use durable chain and flight materials, wear-resistant lining, and a sealed casing engineered for long service life under demanding conditions.

● OUR STRENGTH

Why Choose Movers India

With in-house manufacturing since 1979 and decades of process equipment experience, our drag chain conveyors are built for reliability in the toughest material handling conditions. Unlike drag chain conveyor manufacturers who assemble bought-in components, we fabricate the trough, chain and flights ourselves.

FAQs

A drag chain conveyor is fully enclosed, using a chain with flights to drag material through a sealed trough, which makes it ideal for hot, abrasive, or dusty materials with minimal spillage. A belt conveyor is typically open (unless covered), better suited to high-volume, longer-distance transport, but more exposed to dust and material loss along the way.

Drag chain conveyors are best suited for hot, abrasive, or fine powdery materials such as clinker, fly ash, coal, and cement, where an open belt system would struggle with dust or heat.

Our drag chain conveyors can handle capacities up to 500+ TPH, with trough lengths built in extendable sections to suit site-specific layouts.

[CLIENT TO CONFIRM source document answers “No” here, but the specification table above states an incline angle of 0°–30°. Please confirm which is correct before publishing.]

Ask Our Team

Have a question? Send us a message and we’ll get back to you.

1979
In business since
9
Countries incl. India
In-house
Manufacturing

Request a Quote

Talk to our engineering team about your drag chain conveyor requirement.

error: